Enabling WAN Federation Control Plane Traffic

WAN federation via mesh gateways allows for Consul servers in different datacenters to be federated exclusively through mesh gateways.

When setting up a multi-datacenter Consul cluster, operators must ensure that all Consul servers in every datacenter must be directly connectable over their WAN-advertised network address from each other.

This requires that operators setting up the virtual machines or containers hosting the servers take additional steps to ensure the necessary routing and firewall rules are in place to allow the servers to speak to each other over the WAN.

Sometimes this prerequisite is difficult or undesirable to meet:

• Difficult: The datacenters may exist in multiple Kubernetes clusters that unfortunately have overlapping pod IP subnets, or may exist in different cloud provider VPCs that have overlapping subnets.

• Undesirable: Network security teams may not approve of granting so many firewall rules. When using platform autoscaling, keeping rules up to date becomes untenable.

Operators looking to simplify their WAN deployment and minimize the exposed security surface area can elect to join these datacenters together using mesh gateways to do so.

Architecture

There are two main kinds of communication that occur over the WAN link spanning the gulf between disparate Consul datacenters:

• WAN gossip: We leverage the serf and memberlist libraries to gossip around failure detector knowledge about Consul servers in each datacenter. By default this operates point to point between servers over 8302/udp with a fallback to 8302/tcp (which logs a warning indicating the network is misconfigured).

• Cross-datacenter RPCs: Consul servers expose a special multiplexed port over 8300/tcp. Several distinct kinds of messages can be received on this port, such as RPC requests forwarded from servers in other datacenters.

In this network topology individual Consul client agents on a LAN in one datacenter never need to directly dial servers in other datacenters. This means you could introduce a set of firewall rules prohibiting 10.0.0.0/24 from sending any traffic at all to 10.1.2.0/24 for security isolation.

You may already have configured mesh gateways to allow for services in the service mesh to freely connect between datacenters regardless of the lateral connectivity of the nodes hosting the Consul client agents.

By activating WAN federation via mesh gateways the servers can similarly use the existing mesh gateways to reach each other without themselves being directly reachable.

Configuration

TLS

All Consul servers in all datacenters should have TLS configured with certificates containing these SAN fields:

server.<this_datacenter>.<domain>              (normal)
<node_name>.server.<this_datacenter>.<domain>  (needed for wan federation)

This can be achieved using any number of tools, including consul tls cert create with the -node flag.

Mesh Gateways

There needs to be at least one mesh gateway configured to opt-in to exposing the servers in its configuration. When using the consul connect envoy CLI this is done by using the flag -expose-servers. All this does is to register the mesh gateway into the catalog with the additional piece of service metadata of {"consul-wan-federation":"1"}. If you are registering the mesh gateways into the catalog out of band you may simply add this to your existing registration payload.

Consul Server Options

There are a few necessary additional pieces of configuration beyond those required for standing up a multi-datacenter Consul cluster.

Consul servers in the primary datacenter should add this snippet to the configuration file:

connect {
  enabled = true
  enable_mesh_gateway_wan_federation = true
}

Consul servers in all secondary datacenters should add this snippet to the configuration file:

primary_gateways = [ "<primary-mesh-gateway-ip>:<primary-mesh-gateway-port>", ... ]
connect {
  enabled = true
  enable_mesh_gateway_wan_federation = true
}

The retry_join_wan addresses are only used for the traditional federation process. They must be omitted when federating Consul servers via gateways.

Bootstrapping

For ease of debugging (such as avoiding a flurry of misleading error messages) when intending to activate WAN federation via mesh gateways it is best to follow this general procedure:

New secondary

1. Upgrade to the desired version of the consul binary for all servers, clients, and CLI.
2. Start all consul servers and clients on the new version in the primary datacenter.
3. Ensure the primary datacenter has at least one running, registered mesh gateway with the service metadata key of {"consul-wan-federation":"1"} set.
4. Ensure you are prepared to launch corresponding mesh gateways in all secondaries. When ACLs are enabled actually registering these requires upstream connectivity to the primary datacenter to authorize catalog registration.
5. Ensure all servers in the primary datacenter have updated configuration and restart.
6. Ensure all servers in the secondary datacenter have updated configuration.
7. Start all consul servers and clients on the new version in the secondary datacenter.
8. When ACLs are enabled, shortly afterwards it should become possible to resolve ACL tokens from the secondary, at which time it should be possible to launch the mesh gateways in the secondary datacenter.

Existing secondary

1. Upgrade to the desired version of the consul binary for all servers, clients, and CLI.
2. Restart all consul servers and clients on the new version.
3. Ensure each datacenter has at least one running, registered mesh gateway with the service metadata key of {"consul-wan-federation":"1"} set.
4. Ensure all servers in the primary datacenter have updated configuration and restart.
5. Ensure all servers in the secondary datacenter have updated configuration and restart.

Verification

From any two datacenters joined together double check the following give you an expected result:

• Check that consul members -wan lists all servers in all datacenters with their local ip addresses and are listed as alive.

• Ensure any API request that activates datacenter request forwarding. such as /v1/catalog/services?dc=<OTHER_DATACENTER_NAME> succeeds.

Upgrading the primary gateways

Once federation is established, secondary datacenters will continuously request updated mesh gateway addresses from the primary datacenter. Consul routes the requests through the primary datacenter's mesh gateways. This is because secondary datacenters cannot directly dial the primary datacenter's Consul servers. If the primary gateways are upgraded, and their previous instances are decommissioned before the updates are propagated, then the primary datacenter will become unreachable.

To safely upgrade primary gateways, we recommend that you apply one of the following policies:

• Avoid decommissioning primary gateway IP addresses. This is because the primary_gateways addresses configured on the secondary servers act as a fallback mechanism for re-establishing connectivity to the primary.

• Verify that addresses of the new mesh gateways in the primary were propagated to the secondary datacenters before decommissioning the old mesh gateways in the primary.