Command: node status

The node status command is used to display information about client nodes. A node must first be registered with the servers before it will be visible in this output.

Usage

nomad node status [options] [node]

If no node ID is passed, then the command will enter "list mode" and dump a high-level list of all known nodes. This list output contains less information but is a good way to get a bird's-eye view of things.

If there is an exact match based on the provided node ID or prefix, then that particular node will be queried, and detailed information will be displayed, including resource usage statistics. Otherwise, a list of matching nodes and information will be displayed. If running the command on a Nomad Client, the -self flag is useful to quickly access the status of the local node.

If ACLs are enabled, this option requires a token with the 'node:read' capability.

General Options

-address=<addr>: The address of the Nomad server. Overrides the NOMAD_ADDR environment variable if set. Defaults to http://127.0.0.1:4646.
-region=<region>: The region of the Nomad server to forward commands to. Overrides the NOMAD_REGION environment variable if set. Defaults to the Agent's local region.
-no-color: Disables colored command output. Alternatively, NOMAD_CLI_NO_COLOR may be set. This option takes precedence over -force-color.
-force-color: Forces colored command output. This can be used in cases where the usual terminal detection fails. Alternatively, NOMAD_CLI_FORCE_COLOR may be set. This option has no effect if -no-color is also used.
-ca-cert=<path>: Path to a PEM encoded CA cert file to use to verify the Nomad server SSL certificate. Overrides the NOMAD_CACERT environment variable if set.
-ca-path=<path>: Path to a directory of PEM encoded CA cert files to verify the Nomad server SSL certificate. If both -ca-cert and -ca-path are specified, -ca-cert is used. Overrides the NOMAD_CAPATH environment variable if set.
-client-cert=<path>: Path to a PEM encoded client certificate for TLS authentication to the Nomad server. Must also specify -client-key. Overrides the NOMAD_CLIENT_CERT environment variable if set.
-client-key=<path>: Path to an unencrypted PEM encoded private key matching the client certificate from -client-cert. Overrides the NOMAD_CLIENT_KEY environment variable if set.
-tls-server-name=<value>: The server name to use as the SNI host when connecting via TLS. Overrides the NOMAD_TLS_SERVER_NAME environment variable if set.
-tls-skip-verify: Do not verify TLS certificate. This is highly not recommended. Verification will also be skipped if NOMAD_SKIP_VERIFY is set.
-token: The SecretID of an ACL token to use to authenticate API requests with. Overrides the NOMAD_TOKEN environment variable if set.

Status Options

-self: Query the status of the local node.
-stats: Display detailed resource usage statistics.
-allocs: When a specific node is not being queried, shows the number of running allocations per node.
-short: Display short output. Used only when querying a single node.
-verbose: Show full information.
-per-page: How many results to show per page.
-page-token: Where to start pagination.
-filter: Specifies an expression used to filter query results.
-os: Display operating system name.
-quiet: Display only node IDs.
-json : Output the node in its JSON format.
-t : Format and display node using a Go template.

Examples

List view:

$ nomad node status
ID        DC   Name   Class   Drain  Eligibility  Status
a72dfba2  dc1  node1  <none>  false  eligible     ready
1f3f03ea  dc1  node2  <none>  false  eligible     ready

List view, with operating system name:

$ nomad node status -os
ID        DC   Name   Class   OS      Drain  Eligibility  Status
a72dfba2  dc1  node1  <none>  ubuntu  false  eligible     ready
f73e3993  dc1  node2  <none>  centos  false  eligible     ready

List view, with quiet:

$ nomad node status -quiet
820561cf-830d-b089-cg03-f2cfc4cecff7
07949e3a-4c25-e1bf-3dbh-984c2e28fec2
8bc2c581-37ba-dj08-9f67-53bc217f36f8
f35be281-85a5-d1e6-d268-6e8a6f0684df

NOTE: -quiet cannot be used in conjuction with -verbose or -json.

List view, with running allocations:

$ nomad node status -allocs
ID        DC   Name   Class   Drain  Eligibility  Status  Running Allocs
4d2ba53b  dc1  node1  <none>  false  eligible     ready   1
34dfba32  dc1  node2  <none>  false  eligible     ready   3

Single-node view in short mode:

$ nomad node status -short 1f3f03ea
ID     = c754da1f
Name   = nomad
Class  = <none>
DC     = dc1
Drain  = false
Status = ready
Uptime = 17h2m25s

Allocations
ID        Eval ID   Job ID   Task Group  Desired Status  Client Status
0b8b9e37  8bf94335  example  cache       run             running

Full output for a single node:

$ nomad node status 1f3f03ea
ID     = c754da1f
Name    = nomad-server01
Class   = <none>
DC      = dc1
Drain   = false
Status  = ready
Uptime  = 17h42m50s

Drivers
Driver    Detected  Healthy
docker    false     false
exec      true      true
java      true      true
qemu      true      true
raw_exec  true      true
rkt       true      true

Node Events
Time                  Subsystem       Message
2018-03-29T17:24:42Z  Driver: docker  Driver docker is not detected
2018-03-29T17:23:42Z  Cluster         Node registered

Allocated Resources
CPU           Memory           Disk
500/2600 MHz  256 MiB/2.0 GiB  300 MiB/32 GiB

Allocation Resource Utilization
CPU           Memory
430/2600 MHz  199 MiB/2.0 GiB

Host Resource Utilization
CPU           Memory           Disk
513/3000 MHz  551 MiB/2.4 GiB  4.2 GiB/52 GiB

Allocations
ID        Eval ID   Job ID   Task Group  Desired Status  Client Status
7bff7214  b3a6b9d2  example  cache       run             running

Using -self when on a Nomad Client:

$ nomad node status -self
ID     = c754da1f
Name   = nomad-client01
Class  = <none>
DC     = dc1
Drain  = false
Status = ready
Uptime = 17h7m41s

Drivers
Driver    Detected  Healthy
docker    false     false
exec      true      true
java      true      true
qemu      true      true
raw_exec  true      true
rkt       true      true

Node Events
Time                  Subsystem       Message
2018-03-29T17:24:42Z  Driver: docker  Driver docker is not detected
2018-03-29T17:23:42Z  Cluster         Node registered

Allocated Resources
CPU            Memory           Disk
2500/2600 MHz  1.3 GiB/2.0 GiB  1.5 GiB/32 GiB

Allocation Resource Utilization
CPU            Memory
2200/2600 MHz  1.7 GiB/2.0 GiB

Host Resource Utilization
CPU            Memory           Disk
2430/3000 MHz  1.8 GiB/2.4 GiB  6.5 GiB/40 GiB

Allocations
ID        Eval ID   Job ID   Task Group  Desired Status  Client Status
0b8b9e37  8bf94335  example  cache       run             running
b206088c  8bf94335  example  cache       run             running
b82f58b6  8bf94335  example  cache       run             running
ed3665f5  8bf94335  example  cache       run             running
24cfd201  8bf94335  example  cache       run             running

You will note that in the above examples, the Allocations output contains columns labeled Desired Status and Client status.

Desired Status represents the goal of the scheduler on the allocation with the following valid statuses:

run: The allocation should run
stop: The allocation should stop

Client Status represents the emergent state of the allocation and include the following:

pending: The allocation is pending and will be running
running: The allocation is currently running
complete: The allocation was running and completed successfully
failed: The allocation was running and completed with a non-zero exit code
lost: The node that was running the allocation has failed or has been partitioned

Using -stats to see detailed to resource usage information on the node:

$ nomad node status -stats c754da1f
ID     = c754da1f
Name   = nomad-client01
Class  = <none>
DC     = dc1
Drain  = false
Status = ready
Uptime = 17h7m41s

Drivers
Driver    Detected  Healthy
docker    false     false
exec      true      true
java      true      true
qemu      true      true
raw_exec  true      true
rkt       true      true

Node Events
Time                  Subsystem       Message
2018-03-29T17:24:42Z  Driver: docker  Driver docker is not detected
2018-03-29T17:23:42Z  Cluster         Node registered

Allocated Resources
CPU            Memory           Disk
2500/2600 MHz  1.3 GiB/2.0 GiB  1.5 GiB/32 GiB

Allocation Resource Utilization
CPU            Memory
2200/2600 MHz  1.7 GiB/2.0 GiB

Host Resource Utilization
CPU            Memory           Disk
2430/3000 MHz  1.8 GiB/2.4 GiB  3.9 GiB/40 GiB

CPU Stats
CPU    = cpu0
User   = 96.94%
System = 1.02%
Idle   = 2.04%

CPU    = cpu1
User   = 97.92%
System = 2.08%
Idle   = 0.00%

Memory Stats
Total     = 2.4 GiB
Available = 612 MiB
Used      = 1.8 GiB
Free      = 312 MiB

Disk Stats
Device         = /dev/mapper/ubuntu--14--vg-root
MountPoint     = /
Size           = 38 GiB
Used           = 3.9 GiB
Available      = 32 GiB
Used Percent   = 10.31%
Inodes Percent = 3.85%

Device         = /dev/sda1
MountPoint     = /boot
Size           = 235 MiB
Used           = 45 MiB
Available      = 178 MiB
Used Percent   = 19.17%
Inodes Percent = 0.48%

Allocations
ID        Eval ID   Job ID   Task Group  Desired Status  Client Status
0b8b9e37  8bf94335  example  cache       run             running
b206088c  8bf94335  example  cache       run             running
b82f58b6  8bf94335  example  cache       run             running
ed3665f5  8bf94335  example  cache       run             running
24cfd201  8bf94335  example  cache       run             running

To view verbose information about the node:

$ nomad node status -verbose c754da1f
ID     = c754da1f-6337-b86d-47dc-2ef4c71aca14
Name   = nomad
Class  = <none>
DC     = dc1
Drain  = false
Status = ready
Uptime = 17h7m41s

Host Volumes
Name  ReadOnly  Source

CSI Volumes
ID        Name  Plugin ID  Schedulable  Access Mode         Mount Options
402f2c83  vol   plug       true         single-node-writer  <none>

Drivers
Driver    Detected  Healthy  Message                        Time
docker    false     false    Driver docker is not detected  2018-03-29T17:24:42Z
exec      true      true     <none>                         2018-03-29T17:23:42Z
java      true      true     <none>                         2018-03-29T17:23:41Z
qemu      true      true     <none>                         2018-03-29T17:23:41Z
raw_exec  true      true     <none>                         2018-03-29T17:23:42Z
rkt       true      true     <none>                         2018-03-29T17:23:42Z

Node Events
Time                  Subsystem       Message                        Details
2018-03-29T17:24:42Z  Driver: docker  Driver docker is not detected  driver: docker,
2018-03-29T17:23:42Z  Cluster         Node registered                <none>

Allocated Resources
CPU            Memory           Disk
2500/2600 MHz  1.3 GiB/2.0 GiB  1.5 GiB/32 GiB

Allocation Resource Utilization
CPU            Memory
2200/2600 MHz  1.7 GiB/2.0 GiB

Host Resource Utilization
CPU           Memory           Disk
230/3000 MHz  121 MiB/2.4 GiB  6.5 GiB/40 GiB

Allocations
ID                                    Eval ID                               Job ID   Task Group  Desired Status  Client Status
3d743cff-8d57-18c3-2260-a41d3f6c5204  2fb686da-b2b0-f8c2-5d57-2be5600435bd  example  cache       run             complete

Attributes
arch                      = amd64
cpu.frequency             = 1300.000000
cpu.modelname             = Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz
cpu.numcores              = 2
cpu.totalcompute          = 2600.000000
driver.docker             = 1
driver.docker.version     = 1.10.3
driver.exec               = 1
driver.java               = 1
driver.java.runtime       = OpenJDK Runtime Environment (IcedTea 2.6.4) (7u95-2.6.4-0ubuntu0.14.04.2)
driver.java.version       = 1.7.0_95
driver.java.vm            = OpenJDK 64-Bit Server VM (build 24.95-b01, mixed mode)
driver.qemu               = 1
driver.qemu.version       = 2.0.0
driver.raw_exec           = 1
driver.rkt                = 1
driver.rkt.appc.version   = 0.7.4
driver.rkt.version        = 1.2.0
hostname                  = nomad
kernel.name               = linux
kernel.version            = 3.19.0-25-generic
memory.totalbytes         = 2094473216
nomad.revision            = '270da7a60ccbf39eeeadc4064a59ca06bf9ac6fc+CHANGES'
nomad.version             = 0.3.2dev
os.name                   = ubuntu
os.version                = 14.04
unique.cgroup.mountpoint  = /sys/fs/cgroup
unique.network.ip-address = 127.0.0.1
unique.storage.bytesfree  = 36044333056
unique.storage.bytestotal = 41092214784
unique.storage.volume     = /dev/mapper/ubuntu--14--vg-root