DTL

Type: azure-dtl Artifact BuilderId: Azure.ResourceManagement.VMImage

The Azure DevTest Labs builder builds custom images and uploads them to an existing DevTest Lab image repository automatically. For more information on crating an Azure DevTest Lab see the Configuring a Lab How-to guide.

Configuration Reference

There are many configuration options available for the builder. We'll start with authentication parameters, then go over the Azure ARM builder specific options. In addition to the options listed here, a communicator can be configured for this builder.

Azure DevTest Labs builder specific options

Required:

• managed_image_resource_group_name (string) - Specify the managed image resource group name where the result of the Packer build will be saved. The resource group must already exist. If this value is set, the value managed_image_name must also be set. See documentation to learn more about managed images.

• managed_image_name (string) - Specify the managed image name where the result of the Packer build will be saved. The image name must not exist ahead of time, and will not be overwritten. If this value is set, the value managed_image_resource_group_name must also be set. See documentation to learn more about managed images.

• lab_name (string) - Name of the existing lab where the virtual machine will be created.

• lab_subnet_name (string) - Name of the subnet being used in the lab, if not the default.

• lab_resource_group_name (string) - Name of the resource group where the lab exist.

Optional:

• capture_name_prefix (string) - Capture

• capture_container_name (string) - Capture Container Name

• shared_image_gallery (SharedImageGallery) - Use a Shared Gallery image as the source for this build. VHD targets are incompatible with this build type - the target must be a Managed Image.

• shared_image_gallery_destination (SharedImageGalleryDestination) - The name of the Shared Image Gallery under which the managed image will be published as Shared Gallery Image version.

  Following is an example.

• shared_image_gallery_timeout (duration string | ex: "1h5m2s") - How long to wait for an image to be published to the shared image gallery before timing out. If your Packer build is failing on the Publishing to Shared Image Gallery step with the error Original Error: context deadline exceeded, but the image is present when you check your Azure dashboard, then you probably need to increase this timeout from its default of "60m" (valid time units include s for seconds, m for minutes, and h for hours.)

• custom_image_capture_timeout (duration string | ex: "1h5m2s") - How long to wait for an image to be captured before timing out If your Packer build is failing on the Capture Image step with the error Original Error: context deadline exceeded, but the image is present when you check your custom image repository, then you probably need to increase this timeout from its default of "30m" (valid time units include s for seconds, m for minutes, and h for hours.)

• image_publisher (string) - PublisherName for your base image. See documentation for details.

  CLI example az vm image list-publishers --location westus

• image_offer (string) - Offer for your base image. See documentation for details.

  CLI example az vm image list-offers --location westus --publisher Canonical

• image_sku (string) - SKU for your base image. See documentation for details.

  CLI example az vm image list-skus --location westus --publisher Canonical --offer UbuntuServer

• image_version (string) - Specify a specific version of an OS to boot from. Defaults to latest. There may be a difference in versions available across regions due to image synchronization latency. To ensure a consistent version across regions set this value to one that is available in all regions where you are deploying.

  CLI example az vm image list --location westus --publisher Canonical --offer UbuntuServer --sku 16.04.0-LTS --all

• image_url (string) - Specify a custom VHD to use. If this value is set, do not set image_publisher, image_offer, image_sku, or image_version.

• custom_managed_image_resource_group_name (string) - Specify the source managed image's resource group used to use. If this value is set, do not set image_publisher, image_offer, image_sku, or image_version. If this value is set, the value custom_managed_image_name must also be set. See documentation to learn more about managed images.

• custom_managed_image_name (string) - Specify the source managed image's name to use. If this value is set, do not set image_publisher, image_offer, image_sku, or image_version. If this value is set, the value custom_managed_image_resource_group_name must also be set. See documentation to learn more about managed images.

• location (string) - Location

• vm_size (string) - Size of the VM used for building. This can be changed when you deploy a VM from your VHD. See pricing information. Defaults to Standard_A1.

  CLI example az vm list-sizes --location westus

• managed_image_storage_account_type (string) - Specify the storage account type for a managed image. Valid values are Standard_LRS and Premium_LRS. The default is Standard_LRS.

• azure_tags (map[string]string) - the user can define up to 15 tags. Tag names cannot exceed 512 characters, and tag values cannot exceed 256 characters. Tags are applied to every resource deployed by a Packer build, i.e. Resource Group, VM, NIC, VNET, Public IP, KeyVault, etc.

• plan_id (string) - Used for creating images from Marketplace images. Please refer to Deploy an image with Marketplace terms for more details. Not all Marketplace images support programmatic deployment, and support is controlled by the image publisher. Plan_id is a string with unique identifier for the plan associated with images. Ex plan_id="1-12ab"

• polling_duration_timeout (duration string | ex: "1h5m2s") - The default PollingDuration for azure is 15mins, this property will override that value. If your Packer build is failing on the ARM deployment step with the error Original Error: context deadline exceeded, then you probably need to increase this timeout from its default of "15m" (valid time units include s for seconds, m for minutes, and h for hours.)

• os_type (string) - If either Linux or Windows is specified Packer will automatically configure authentication credentials for the provisioned machine. For Linux this configures an SSH authorized key. For Windows this configures a WinRM certificate.

• os_disk_size_gb (int32) - Specify the size of the OS disk in GB (gigabytes). Values of zero or less than zero are ignored.

• disk_additional_size ([]int32) - For Managed build the final artifacts are included in the managed image. The additional disk will have the same storage account type as the OS disk, as specified with the managed_image_storage_account_type setting.

• disk_caching_type (string) - Specify the disk caching type. Valid values are None, ReadOnly, and ReadWrite. The default value is ReadWrite.

• storage_type (string) - DTL values

• lab_virtual_network_name (string) - Name of the virtual network used for communicating with the lab vms.

• dtl_artifacts ([]DtlArtifact) - One or more Artifacts that should be added to the VM at start.

• vm_name (string) - Name for the virtual machine within the DevTest lab.

• disallow_public_ip (bool) - DisallowPublicIPAddress - Indicates whether the virtual machine is to be created without a public IP address.

• skip_sysprep (bool) - SkipSysprep - Indicates whether SysPrep is to be requested to the DTL or if it should be skipped because it has already been applied. Defaults to false.

• cloud_environment_name (string) - One of Public, China, or USGovernment. Defaults to Public. Long forms such as USGovernmentCloud and AzureUSGovernmentCloud are also supported.

• metadata_host (string) - The Hostname of the Azure Metadata Service (for example management.azure.com), used to obtain the Cloud Environment when using a Custom Azure Environment. This can also be sourced from the ARM_METADATA_HOST Environment Variable. Note: CloudEnvironmentName must be set to the requested environment name in the list of available environments held in the metadata_host.

• client_id (string) - The application ID of the AAD Service Principal. Requires either client_secret, client_cert_path or client_jwt to be set as well.

• client_secret (string) - A password/secret registered for the AAD SP.

• client_cert_path (string) - The path to a PKCS#12 bundle (.pfx file) to be used as the client certificate that will be used to authenticate as the specified AAD SP.

• client_cert_password (string) - The password for decrypting the client certificate bundle.

• client_jwt (string) - A JWT bearer token for client auth (RFC 7523, Sec. 2.2) that will be used to authenticate the AAD SP. Provides more control over token the expiration when using certificate authentication than when using client_cert_path.

• object_id (string) - The object ID for the AAD SP. Optional, will be derived from the oAuth token if left empty.

• tenant_id (string) - The Active Directory tenant identifier with which your client_id and subscription_id are associated. If not specified, tenant_id will be looked up using subscription_id.

• subscription_id (string) - The subscription to use.

• oidc_request_token (string) - OIDC Request Token is used for GitHub Actions OIDC, this token is used with oidc_request_url to fetch access tokens to Azure Value in GitHub Actions can be extracted from the ACTIONS_ID_TOKEN_REQUEST_TOKEN variable Refer to Configure a federated identity credential on an app for details on how setup GitHub Actions OIDC authentication

• oidc_request_url (string) - OIDC Request URL is used for GitHub Actions OIDC, this token is used with oidc_request_url to fetch access tokens to Azure Value in GitHub Actions can be extracted from the ACTIONS_ID_TOKEN_REQUEST_URL variable

• use_azure_cli_auth (bool) - Flag to use Azure CLI authentication. Defaults to false. CLI auth will use the information from an active az login session to connect to Azure and set the subscription id and tenant id associated to the signed in account. If enabled, it will use the authentication provided by the az CLI. Azure CLI authentication will use the credential marked as isDefault and can be verified using az account show. Works with normal authentication (az login) and service principals (az login --service-principal --username APP_ID --password PASSWORD --tenant TENANT_ID). Ignores all other configurations if enabled.

• skip_create_image (bool) - Skip creating the image. Useful for setting to true during a build test stage. Defaults to false.

DtlArtifact

• artifact_name (string) - Artifact Name

• artifact_id (string) - Artifact Id

• parameters ([]ArtifactParameter) - Parameters

ArtifactParmater

• name (string) - Name

• value (string) - Value

• type (string) - Type

Basic Example

variable "client_id" {
  type    = string
  default = "${env("ARM_CLIENT_ID")}"
}

variable "client_secret" {
  type    = string
  default = "${env("ARM_CLIENT_SECRET")}"
}

variable "subscription_id" {
  type    = string
  default = "${env("ARM_SUBSCRIPTION_ID")}"
}

locals { timestamp = regex_replace(timestamp(), "[- TZ:]", "") }

source "azure-dtl" "example" {
  subscription_id                   = "${var.subscription_id}"
  client_id          = "${var.client_id}"
  client_secret      = "${var.client_secret}"
  disallow_public_ip = true
  dtl_artifacts {
    artifact_name = "linux-apt-package"
    parameters {
      name  = "packages"
      value = "vim"
    }
    parameters {
      name  = "update"
      value = "true"
    }
    parameters {
      name  = "options"
      value = "--fix-broken"
    }
  }
  image_offer                       = "UbuntuServer"
  image_publisher                   = "Canonical"
  image_sku                         = "16.04-LTS"
  lab_name                          = "packer-test"
  lab_resource_group_name           = "packer-test"
  lab_virtual_network_name          = "dtlpacker-test"
  location                          = "South Central US"
  managed_image_name                = "ManagedDiskLinux-${local.timestamp}"
  managed_image_resource_group_name = "packer-test"
  os_type                           = "Linux"
  vm_size                           = "Standard_DS2_v2"
}

build {
  sources = ["source.azure-dtl.example"]

}