Transit secrets engine (API)

This is the API documentation for the Vault Transit secrets engine. For general information about the usage and operation of the Transit secrets engine, please see the transit documentation.

This documentation assumes the transit secrets engine is enabled at the /transit path in Vault. Since it is possible to enable secrets engines at any location, please update your API calls accordingly.

Create key

This endpoint creates a new named encryption key of the specified type. The values set here cannot be changed after key creation.

Parameters

• name (string: <required>) – Specifies the name of the encryption key to create. This is specified as part of the URL.

• convergent_encryption (bool: false) – If enabled, the key will support convergent encryption, where the same plaintext creates the same ciphertext. This requires derived to be set to true. When enabled, each encryption(/decryption/rewrap/datakey) operation will derive a nonce value rather than randomly generate it.

• derived (bool: false) – Specifies if key derivation is to be used. If enabled, all encrypt/decrypt requests to this named key must provide a context which is used for key derivation.

• exportable (bool: false) - Enables keys to be exportable. This allows for all the valid keys in the key ring to be exported. Once set, this cannot be disabled.

• allow_plaintext_backup (bool: false) - If set, enables taking backup of named key in the plaintext format. Once set, this cannot be disabled.

• type (string: "aes256-gcm96") – Specifies the type of key to create. The currently-supported types are:

  • aes128-gcm96 – AES-128 wrapped with GCM using a 96-bit nonce size AEAD (symmetric, supports derivation and convergent encryption)
  • aes256-gcm96 – AES-256 wrapped with GCM using a 96-bit nonce size AEAD (symmetric, supports derivation and convergent encryption, default)
  • chacha20-poly1305 – ChaCha20-Poly1305 AEAD (symmetric, supports derivation and convergent encryption)
  • ed25519 – ED25519 (asymmetric, supports derivation). When using derivation, a sign operation with the same context will derive the same key and signature; this is a signing analogue to convergent_encryption.
  • ecdsa-p256 – ECDSA using the P-256 elliptic curve (asymmetric)
  • ecdsa-p384 – ECDSA using the P-384 elliptic curve (asymmetric)
  • ecdsa-p521 – ECDSA using the P-521 elliptic curve (asymmetric)
  • rsa-2048 - RSA with bit size of 2048 (asymmetric)
  • rsa-3072 - RSA with bit size of 3072 (asymmetric)
  • rsa-4096 - RSA with bit size of 4096 (asymmetric)
  • hmac - HMAC (HMAC generation, verification)
  • managed_key - External key configured via the Managed Keys feature (enterprise only)
  • aes128-cmac - AES-128 CMAC (CMAC generation, verification) EnterpriseEnterprise
  • aes256-cmac - AES-256 CMAC (CMAC generation, verification) EnterpriseEnterprise

  Note: In FIPS 140-2 mode, the following algorithms are not certified and thus should not be used: chacha20-poly1305 and ed25519.

  Note: All key types support HMAC through the use of a second randomly generated key created key creation time or rotation. The HMAC key type only supports HMAC, and behaves identically to other algorithms with respect to the HMAC operations but supports key import. By default, the HMAC key type uses a 256-bit key.

  Note: When key type is managed_key, either the managed_key_name or managed_key_id parameter must be specified.

• key_size (int: "0", optional) - The key size in bytes for algorithms that allow variable key sizes. Currently only applicable to HMAC, where it must be between 32 and 512 bytes.

• auto_rotate_period (duration: "0", optional) – The period at which this key should be rotated automatically. Setting this to "0" (the default) will disable automatic key rotation. This value cannot be shorter than one hour. Uses duration format strings.

• managed_key_name (string: "") - The name of the managed key to use for this transit key.

• managed_key_id (string: "") - The UUID of the managed key to use for this transit key.

Sample payload

{
  "type": "ecdsa-p256",
  "derived": true
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/keys/my-key

Import key

This endpoint imports existing key material into a new transit-managed encryption key. To import key material into an existing key, see the import_version/ endpoint.

This supports one of two forms:

1. Private/Symmetric Key import, requiring the ciphertext, hash_function parameters be set (and automatically deriving the public key), or
2. Public Key-only import, restricting the operations that can be done with this key, and requiring only the public_key parameter.

The remaining parameters (including name, type, allow_rotation, derived, context, exportable, allow_plaintext_backup, and auto_rotate_period) remain the same across both versions of this call.

Parameters

• name (string: <required>) – Specifies the name of the encryption key to create. This is specified as part of the URL.

• ciphertext (string: <required>) - A base64-encoded string that contains two values: an ephemeral 256-bit AES key wrapped using the wrapping key returned by Vault and the encryption of the import key material under the provided AES key. The wrapped AES key should be the first 512 bytes of the ciphertext, and the encrypted key material should be the remaining bytes. See the BYOK section of the Transit secrets engine documentation for more information on constructing the ciphertext. If public_key is set, this field is not required.

• hash_function (string: "SHA256") - The hash function used for the RSA-OAEP step of creating the ciphertext. Supported hash functions are: SHA1, SHA224, SHA256, SHA384, and SHA512. If not specified, the hash function defaults to SHA256.

• type (string: <required>) – Specifies the type of key to create. The currently-supported types are:

  • aes128-gcm96 – AES-128 wrapped with GCM using a 96-bit nonce size AEAD (symmetric, supports derivation and convergent encryption)
  • aes256-gcm96 – AES-256 wrapped with GCM using a 96-bit nonce size AEAD (symmetric, supports derivation and convergent encryption, default)
  • chacha20-poly1305 – ChaCha20-Poly1305 AEAD (symmetric, supports derivation and convergent encryption)
  • ed25519 – ED25519 (asymmetric, supports derivation). When using derivation, a sign operation with the same context will derive the same key and signature; this is a signing analogue to convergent_encryption.
  • ecdsa-p256 – ECDSA using the P-256 elliptic curve (asymmetric)
  • ecdsa-p384 – ECDSA using the P-384 elliptic curve (asymmetric)
  • ecdsa-p521 – ECDSA using the P-521 elliptic curve (asymmetric)
  • rsa-2048 - RSA with bit size of 2048 (asymmetric)
  • rsa-3072 - RSA with bit size of 3072 (asymmetric)
  • rsa-4096 - RSA with bit size of 4096 (asymmetric)
  • aes128-cmac - AES-128 CMAC (CMAC generation, verification) EnterpriseEnterprise
  • aes256-cmac - AES-256 CMAC (CMAC generation, verification) EnterpriseEnterprise

• public_key (string: "", optional) - A plaintext PEM public key to be imported. This limits the operations available under this key to verification and encryption, depending on the key type and algorithm, as no private key is available.

• allow_rotation (bool: false) - If set, the imported key can be rotated within Vault by using the rotate endpoint.

• derived (bool: false) – Specifies if key derivation is to be used. If enabled, all encrypt/decrypt requests to this named key must provide a context which is used for key derivation.

• context (string: "") - A base64-encoded string providing a context for key derivation. Required if derived is set to true.

• exportable (bool: false) - Enables keys to be exportable. This allows for all the valid keys in the key ring to be exported. Once set, this cannot be disabled.

• allow_plaintext_backup (bool: false) - If set, enables taking backup of named key in the plaintext format. Once set, this cannot be disabled.

• auto_rotate_period (duration: "0", optional) – The period at which this key should be rotated automatically. Setting this to "0" (the default) will disable automatic key rotation. This value cannot be shorter than one hour.

Sample payload

{
  "type": "ed25519",
  "ciphertext": "..."
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/keys/my-key/import

Import key version

This endpoint imports new key material into an existing imported key.

See description and note in Import Key above about importing public and private keys.

Notably, using this method, a private key matching a public key can be imported at a later date.

Parameters

• name (string: <required>) – Specifies the name of the encryption key to create. This is specified as part of the URL.

• ciphertext (string: <required>) - A base64-encoded string that contains two values: an ephemeral 256-bit AES key wrapped using the wrapping key returned by Vault and the encryption of the import key material under the provided AES key. The wrapped AES key should be the first 512 bytes of the ciphertext, and the encrypted key material should be the remaining bytes. See the BYOK section of the Transit secrets engine documentation for more information on constructing the ciphertext.

• hash_function (string: "SHA256") - The hash function used for the RSA-OAEP step of creating the ciphertext. Supported hash functions are: SHA1, SHA224, SHA256, SHA384, and SHA512. If not specified, the hash function defaults to SHA256.

• public_key (string: "", optional) - A plaintext PEM public key to be imported. This limits the operations available under this key to verification and encryption, depending on the key type and algorithm, as no private key is available.

• version (int, optional) - Key version to be updated, if left empty, a new version will be created unless a private key is specified and the 'Latest' key is missing a private key.

Sample payload

{
  "ciphertext": "..."
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/keys/my-key/import_version

Get wrapping key

This endpoint is used to retrieve the wrapping key to use for importing keys. The returned key will be a 4096-bit RSA public key.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request GET \
    http://127.0.0.1:8200/v1/transit/wrapping_key

Sample response

{
  "data": {
    "public_key": "..."
  },
}

Read key

This endpoint returns information about a named encryption key. The keys object shows the creation time of each key version; the values are not the keys themselves. Depending on the type of key, different information may be returned, e.g. an asymmetric key will return its public key in a standard format for the type.

Parameters

• name (string: <required>) – Specifies the name of the encryption key to read. This is specified as part of the URL.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    http://127.0.0.1:8200/v1/transit/keys/my-key

Sample response

{
  "data": {
    "type": "aes256-gcm96",
    "deletion_allowed": false,
    "derived": false,
    "exportable": false,
    "allow_plaintext_backup": false,
    "keys": {
      "1": 1442851412
    },
    "min_decryption_version": 1,
    "min_encryption_version": 0,
    "name": "foo",
    "supports_encryption": true,
    "supports_decryption": true,
    "supports_derivation": true,
    "supports_signing": false,
    "imported": false
  }
}

The keys attribute lists each version of the key, and the time that key was created as seconds since the Unix epoch. The sample response shows a key that was created on September 22, 2015 7:50:12 PM GMT, and has not been rotated.

The fields supports_encryption, supports_decryption, supports_derivation and supports_signing are derived from the type of the key, and indicate which operations may be performed with it.

List keys

This endpoint returns a list of keys. Only the key names are returned (not the actual keys themselves).

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request LIST \
    http://127.0.0.1:8200/v1/transit/keys

Sample response

{
  "data": {
    "keys": ["foo", "bar"]
  },
  "lease_duration": 0,
  "lease_id": "",
  "renewable": false
}

Delete key

This endpoint deletes a named encryption key. It will no longer be possible to decrypt any data encrypted with the named key. Because this is a potentially catastrophic operation, the deletion_allowed tunable must be set in the key's /config endpoint.

Parameters

• name (string: <required>) – Specifies the name of the encryption key to delete. This is specified as part of the URL.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request DELETE \
    http://127.0.0.1:8200/v1/transit/keys/my-key

Update key configuration

This endpoint allows tuning configuration values for a given key. (These values are returned during a read operation on the named key.)

Parameters

• min_decryption_version (int: 0) – Specifies the minimum version of ciphertext allowed to be decrypted. Adjusting this as part of a key rotation policy can prevent old copies of ciphertext from being decrypted, should they fall into the wrong hands. For signatures, this value controls the minimum version of signature that can be verified against. For HMACs, this controls the minimum version of a key allowed to be used as the key for verification.

• min_encryption_version (int: 0) – Specifies the minimum version of the key that can be used to encrypt plaintext, sign payloads, or generate HMACs. Must be 0 (which will use the latest version) or a value greater or equal to min_decryption_version.

• deletion_allowed (bool: false) - Specifies if the key is allowed to be deleted.

• exportable (bool: false) - Enables keys to be exportable. This allows for all the valid keys in the key ring to be exported. Once set, this cannot be disabled.

• allow_plaintext_backup (bool: false) - If set, enables taking backup of named key in the plaintext format. Once set, this cannot be disabled.

• auto_rotate_period (duration: "", optional) – The period at which this key should be rotated automatically. Setting this to "0" will disable automatic key rotation. This value cannot be shorter than one hour. When no value is provided, the period remains unchanged. Uses duration format strings.

Sample payload

{
  "deletion_allowed": true
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/keys/my-key/config

Rotate key

This endpoint rotates the version of the named key. After rotation, new plaintext requests will be encrypted with the new version of the key. To upgrade ciphertext to be encrypted with the latest version of the key, use the rewrap endpoint. This is only supported with keys that support encryption and decryption operations.

For algorithms with a configurable key size, the rotated key will use the same key size as the previous version.

Parameters

• managed_key_name (string: "") - The name of the managed key to use for this transit key.
• managed_key_id (string: "") - The UUID of the managed key to use for this transit key.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    http://127.0.0.1:8200/v1/transit/keys/my-key/rotate

Sign CSR

This endpoint signs a CSR with the :name key, allowing the key material never to leave Transit. If no template CSR is specified, an empty CSR is signed, otherwise, a copy of the specified CSR with key material replaced with this key material is signed.

Parameters

• name (string: <required>) - Specifies the name of the key to sign the CSR with. This is specified as part of the URL.

• version (string: "") - Specifies the version of the CSR key to use for signing. If the version is set to latest or is not set, the current key will be returned.

• csr (string: "") - Optional PEM-encoded CSR template to use as a basis for the new CSR signed by this key. If not set, an empty CSR is used.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    http://127.0.0.1:8200/v1/transit/keys/my-key/csr

Sample response

{
  "data": {
    "name": "my-key",
    "version": 1,
    "csr": "-----BEGIN ..."
  }
}

Set Certificate Chain

This endpoint sets the certificate chain associated with the :name key, allowing the key material never to leave Transit and for certificates to be tracked in a single mount. Note that this allows updating and rotating the chain as it will overwrite any previously set certificate chain.

Parameters

• name (string: <required>) - Specifies the name of the key to import the certificate chain against. This is specified as part of the URL.

• version (string: "") - Specifies the version of the key to import the chain against. If the version is set to latest or is not set, the current key will be returned.

• certificate_chain (string: <required>) - A PEM encoded certificate chain. It should be composed by one or more concatenated PEM blocks and ordered starting from the end-entity certificate.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    http://127.0.0.1:8200/v1/transit/keys/my-key/set-certificate

Securely export key

This endpoint returns a wrapped copy of the source key, protected by the destination key using the BYOK method accepted by the /transit/keys/:name/import API. This allows an operator using two separate Vault instances to secure established shared key material, without exposing either key in plaintext and needing to run a manual BYOK import using the CLI helper utility.

Parameters

• destination (string: <required>) - Specifies the name of the key to encrypt the source key to: this is usually another mount or cluster's wrapping key (from /transit/wrapping_key). This is specified as part of the URL.

• source (string: <required>) - Specifies the source key to encrypt, to copy (encrypted) to another cluster. This is specified as part of the URL.

• version (string: "") - Specifies the version of the source key to wrap. If omitted, all versions of the key will be returned. This is specified as part of the URL. If the version is set to latest, the current key will be returned.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    http://127.0.0.1:8200/v1/transit/byok-export/wrapping-key/to-be-shared-key/1

Sample response

{
  "data": {
    "name": "foo",
    "keys": {
      "1": "H/0T+CKQ8I82KJWpPk ... additional response elided ...",
    }
  }
}

Export key

This endpoint returns the named key. The keys object shows the value of the key for each version. If version is specified, the specific version will be returned. If latest is provided as the version, the current key will be provided. Depending on the type of key, different information may be returned. The key must be exportable to support this operation and the version must still be valid.

Parameters

• key_type (string: <required>) – Specifies the type of the key to export. This is specified as part of the URL. Valid values are:

  • encryption-key
  • signing-key
  • hmac-key
  • public-key, to return the corresponding public keys of private key asymmetric keys (EC with NIST P-curves or Ed25519 and RSA).
  • certificate-chain, to return the imported certificate chain (via set-certificate) corresponding to this key and version.
  • cmac-key EnterpriseEnterprise

• name (string: <required>) – Specifies the name of the key to read information about. This is specified as part of the URL.

• version (string: "") – Specifies the version of the key to read. If omitted, all versions of the key will be returned. This is specified as part of the URL. If the version is set to latest, the current key will be returned.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    http://127.0.0.1:8200/v1/transit/export/encryption-key/my-key/1

Sample response

{
  "data": {
    "name": "foo",
    "keys": {
      "1": "eyXYGHbTmugUJn6EtYD/yVEoF6pCxm4R/cMEutUm3MY=",
      "2": "Euzymqx6iXjS3/NuGKDCiM2Ev6wdhnU+rBiKnJ7YpHE="
    }
  }
}

Write keys configuration

This endpoint maintains global configuration across all keys. This allows removing the upsert capability of the /encrypt/:key endpoint, preventing new keys from being created if none exists.

Parameters

• disable_upsert (bool: false) - Specifies whether to disable upserting on encryption (automatic creation of unknown keys).

Sample payload

{
  "disable_upsert": true
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/config/keys

Sample response

{
  "data": {
    "disable_upsert": true,
  }
}

Read keys configuration

This endpoint maintains global configuration across all keys. This allows removing the upsert capability of the /encrypt/:key endpoint, preventing new keys from being created if none exists.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    http://127.0.0.1:8200/v1/transit/config/keys

Sample response

{
  "data": {
    "disable_upsert": false,
  }
}

Encrypt data

This endpoint encrypts the provided plaintext using the named key. This path supports the create and update policy capabilities as follows: if the user has the create capability for this endpoint in their policies, and the key does not exist, it will be upserted with default values (whether the key requires derivation depends on whether the context parameter is empty or not). If the user only has update capability and the key does not exist, an error will be returned.

Parameters

• name (string: <required>) – Specifies the name of the encryption key to encrypt against. This is specified as part of the URL.

• plaintext (string: <required>) – Specifies base64 encoded plaintext to be encoded.

• associated_data (string: "") - Specifies base64 encoded associated data (also known as additional data or AAD) to also be authenticated with AEAD ciphers (aes128-gcm96, aes256-gcm, and chacha20-poly1305).

• padding_scheme (string: "oaep") – Specifies the RSA encryption padding scheme for RSA keys. Must be one of the following supported signature types:

  • oaep
  • pkcs1v15

  Warning: pkcs1v15 is a legacy padding scheme with security weaknesses. It is recommended that the default of OAEP be used unless specific backwards compatibility is required.

• context (string: "") – Specifies the base64 encoded context for key derivation. This is required if key derivation is enabled for this key.

• key_version (int: 0) – Specifies the version of the key to use for encryption. If not set, uses the latest version. Must be greater than or equal to the key's min_encryption_version, if set.

• nonce (string: "") – Specifies the base64 encoded nonce value. This must be provided if convergent encryption is enabled for this key and the key was generated with Vault 0.6.1. Not required for keys created in 0.6.2+. The value must be exactly 96 bits (12 bytes) long and the user must ensure that for any given context (and thus, any given encryption key) this nonce value is never reused.

• reference (string: "") - A user-supplied string that will be present in the reference field on the corresponding batch_results item in the response, to assist in understanding which result corresponds to a particular input. Only valid on batch requests when using ‘batch_input’ below.

• batch_input (array<object>: nil) – Specifies a list of items to be encrypted in a single batch. When this parameter is set, if the parameters 'plaintext', 'context' and 'nonce' are also set, they will be ignored. Any batch output will preserve the order of the batch input. The format for the input is:

  [
    {
      "context": "c2FtcGxlY29udGV4dA==",
      "plaintext": "dGhlIHF1aWNrIGJyb3duIGZveA=="
    },
    {
      "context": "YW5vdGhlcnNhbXBsZWNvbnRleHQ=",
      "plaintext": "dGhlIHF1aWNrIGJyb3duIGZveA=="
    }
  ]
  

• type (string: "aes256-gcm96") –This parameter is required when encryption key is expected to be created. When performing an upsert operation, the type of key to create.

• convergent_encryption (string: "") – This parameter will only be used when a key is expected to be created. Whether to support convergent encryption. This is only supported when using a key with key derivation enabled and will require all requests to carry both a context and 96-bit (12-byte) nonce. The given nonce will be used in place of a randomly generated nonce. As a result, when the same context and nonce are supplied, the same ciphertext is generated. It is very important when using this mode that you ensure that all nonces are unique for a given context. Failing to do so will severely impact the ciphertext's security.

• partial_failure_response_code (int: 400) Ordinarily, if a batch item fails to encrypt due to a bad input, but other batch items succeed, the HTTP response code is 400 (Bad Request). Some applications may want to treat partial failures differently. Providing the parameter returns the given response code integer instead of a failed status code in this case. If all values fail an error code is still returned. Be warned that some failures (such as failure to decrypt) could be indicative of a security breach and should not be ignored.

~>NOTE: All plaintext data must be base64-encoded. The reason for this requirement is that Vault does not require that the plaintext is "text". It could be a binary file such as a PDF or image. The easiest safe transport mechanism for this data as part of a JSON payload is to base64-encode it.

Sample payload

Fist, encode the plaintext with base64:

$ echo "the quick brown fox" | base64
dGhlIHF1aWNrIGJyb3duIGZveAo=

Use the base64-encoded plaintext in the payload:

{
  "plaintext": "dGhlIHF1aWNrIGJyb3duIGZveAo="
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/encrypt/my-key

Sample response

{
  "data": {
    "ciphertext": "vault:v1:XjsPWPjqPrBi1N2Ms2s1QM798YyFWnO4TR4lsFA="
  }
}

Decrypt data

This endpoint decrypts the provided ciphertext using the named key.

Parameters

• name (string: <required>) – Specifies the name of the encryption key to decrypt against. This is specified as part of the URL.

• ciphertext (string: <required>) – Specifies the ciphertext to decrypt.

• associated_data (string: "") - Specifies base64 encoded associated data (also known as additional data or AAD) to also be authenticated with AEAD ciphers (aes128-gcm96, aes256-gcm, and chacha20-poly1305).

• padding_scheme (string: "oaep") – Specifies the RSA decryption padding scheme for RSA keys. Must be one of the following supported signature types:

  • oaep
  • pkcs1v15

• context (string: "") – Specifies the base64 encoded context for key derivation. This is required if key derivation is enabled.

• nonce (string: "") – Specifies a base64 encoded nonce value used during encryption. Must be provided if convergent encryption is enabled for this key and the key was generated with Vault 0.6.1. Not required for keys created in 0.6.2+.

• reference (string: "") - A user-supplied string that will be present in the reference field on the corresponding batch_results item in the response, to assist in understanding which result corresponds to a particular input. Only valid on batch requests when using ‘batch_input’ below.

• batch_input (array<object>: nil) – Specifies a list of items to be decrypted in a single batch. When this parameter is set, if the parameters 'ciphertext', 'context' and 'nonce' are also set, they will be ignored. Any batch output will preserve the order of the batch input. Format for the input goes like this:

  [
    {
      "context": "c2FtcGxlY29udGV4dA==",
      "ciphertext": "vault:v1:/DupSiSbX/ATkGmKAmhqD0tvukByrx6gmps7dVI="
    },
    {
      "context": "YW5vdGhlcnNhbXBsZWNvbnRleHQ=",
      "ciphertext": "vault:v1:XjsPWPjqPrBi1N2Ms2s1QM798YyFWnO4TR4lsFA="
    }
  ]
  

• partial_failure_response_code (int: 400) Ordinarily, if a batch item fails to encrypt due to a bad input, but other batch items succeed, the HTTP response code is 400 (Bad Request). Some applications may want to treat partial failures differently. Providing the parameter returns the given response code integer instead of a failed status code in this case. If all values fail an error code is still returned. Be warned that some failures (such as failure to decrypt) could be indicative of a security breach and should not be ignored.

Sample payload

{
  "ciphertext": "vault:v1:XjsPWPjqPrBi1N2Ms2s1QM798YyFWnO4TR4lsFA="
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/decrypt/my-key

Sample response

{
  "data": {
    "plaintext": "dGhlIHF1aWNrIGJyb3duIGZveAo="
  }
}

Rewrap data

This endpoint rewraps the provided ciphertext using the latest version of the named key. Because this never returns plaintext, it is possible to delegate this functionality to untrusted users or scripts.

Parameters

• name (string: <required>) – Specifies the name of the encryption key to re-encrypt against. This is specified as part of the URL.

• ciphertext (string: <required>) – Specifies the ciphertext to re-encrypt.

• decrypt_padding_scheme (string: "oaep") – Specifies the RSA padding scheme for RSA keys for the decrypt step. Must be one of the following supported signature types:

  • oaep
  • pkcs1v15

• encrypt_padding_scheme (string: "oaep") – Specifies the RSA padding scheme for RSA keys for the encrypt step. Must be one of the following supported signature types:

  • oaep
  • pkcs1v15

  Warning: pkcs1v15 is a legacy padding scheme with security weaknesses. It is recommended that the default of OAEP be used unless specific backwards compatibility is required.

• context (string: "") – Specifies the base64 encoded context for key derivation. This is required if key derivation is enabled.

• key_version (int: 0) – Specifies the version of the key to use for the operation. If not set, uses the latest version. Must be greater than or equal to the key's min_encryption_version, if set.

• nonce (string: "") – Specifies a base64 encoded nonce value used during encryption. Must be provided if convergent encryption is enabled for this key and the key was generated with Vault 0.6.1. Not required for keys created in 0.6.2+.

• reference (string: "") - A user-supplied string that will be present in the reference field on the corresponding batch_results item in the response, to assist in understanding which result corresponds to a particular input. Only valid on batch requests when using ‘batch_input’ below.

• batch_input (array<object>: nil) – Specifies a list of items to be re-encrypted in a single batch. When this parameter is set, if the parameters 'ciphertext', 'context' and 'nonce' are also set, they will be ignored. Any batch output will preserve the order of the batch input. Format for the input goes like this:

  [
    {
      "context": "c2FtcGxlY29udGV4dA==",
      "ciphertext": "vault:v1:/DupSiSbX/ATkGmKAmhqD0tvukByrx6gmps7dVI="
    },
    {
      "context": "YW5vdGhlcnNhbXBsZWNvbnRleHQ=",
      "ciphertext": "vault:v1:XjsPWPjqPrBi1N2Ms2s1QM798YyFWnO4TR4lsFA="
    }
  ]
  

Sample payload

{
  "ciphertext": "vault:v1:XjsPWPjqPrBi1N2Ms2s1QM798YyFWnO4TR4lsFA="
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/rewrap/my-key

Sample response

{
  "data": {
    "ciphertext": "vault:v2:abcdefgh"
  }
}

Generate data key

This endpoint generates a new high-entropy key and the value encrypted with the named key. Optionally return the plaintext of the key as well. Whether plaintext is returned depends on the path; as a result, you can use Vault ACL policies to control whether a user is allowed to retrieve the plaintext value of a key. This is useful if you want an untrusted user or operation to generate keys that are then made available to trusted users.

Parameters

• type (string: <required>) – Specifies the type of key to generate. If plaintext, the plaintext key will be returned along with the ciphertext. If wrapped, only the ciphertext value will be returned. This is specified as part of the URL.

• name (string: <required>) – Specifies the name of the encryption key to use to encrypt the datakey. This is specified as part of the URL.

• context (string: "") – Specifies the key derivation context, provided as a base64-encoded string. This must be provided if derivation is enabled.

• nonce (string: "") – Specifies a nonce value, provided as base64 encoded. Must be provided if convergent encryption is enabled for this key and the key was generated with Vault 0.6.1. Not required for keys created in 0.6.2+. The value must be exactly 96 bits (12 bytes) long and the user must ensure that for any given context (and thus, any given encryption key) this nonce value is never reused.

• bits (int: 256) – Specifies the number of bits in the desired key. Can be 128, 256, or 512.

• padding_scheme (string: "oaep") – Specifies the RSA encryption padding scheme for RSA keys. Must be one of the following supported signature types:

  • oaep
  • pkcs1v15

  Warning: pkcs1v15 is a legacy padding scheme with security weaknesses. It is recommended that the default of OAEP be used unless specific backwards compatibility is required.

Sample payload

{
  "context": "Ab3=="
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/datakey/plaintext/my-key

Sample response

{
  "data": {
    "plaintext": "dGhlIHF1aWNrIGJyb3duIGZveAo=",
    "ciphertext": "vault:v1:abcdefgh"
  }
}

Generate random bytes

This endpoint returns high-quality random bytes of the specified length.

Parameters

• bytes (int: 32) – Specifies the number of bytes to return. This value can be specified either in the request body, or as a part of the URL.

• format (string: "base64") – Specifies the output encoding. Valid options are hex or base64.

• source (string: "platform") - Specifies the source of the requested bytes. platform, the default, sources bytes from the platform's entropy source. seal sources from entropy augmentation (enterprise only). all mixes bytes from all available sources.

Sample payload

{
  "format": "hex"
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/random/164

Sample response

{
  "data": {
    "random_bytes": "dGhlIHF1aWNrIGJyb3duIGZveAo="
  }
}

Hash data

This endpoint returns the cryptographic hash of given data using the specified algorithm.

Parameters

• algorithm (string: "sha2-256") – Specifies the hash algorithm to use. This can also be specified as part of the URL. Currently-supported algorithms are:

  • sha2-224
  • sha2-256
  • sha2-384
  • sha2-512
  • sha3-224
  • sha3-256
  • sha3-384
  • sha3-512

  Note: In FIPS 140-2 mode, the following algorithms are not certified and thus should not be used: sha3-224, sha3-256, sha3-384, and sha3-512.

• input (string: <required>) – Specifies the base64 encoded input data.

• format (string: "hex") – Specifies the output encoding. This can be either hex or base64.

Sample payload

{
  "input": "adba32=="
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/hash/sha2-512

Sample response

{
  "data": {
    "sum": "dGhlIHF1aWNrIGJyb3duIGZveAo="
  }
}

Generate HMAC

This endpoint returns the digest of given data using the specified hash algorithm and the named key. The key can be of any type supported by transit, as each transit key version has an independent, random 256-bit HMAC secret key. If the key is of a type that supports rotation, the latest (current) version will be used.

Parameters

• name (string: <required>) – Specifies the name of the encryption key to generate hmac against. This is specified as part of the URL.

• key_version (int: 0) – Specifies the version of the key to use for the operation. If not set, uses the latest version. Must be greater than or equal to the key's min_encryption_version, if set.

• algorithm (string: "sha2-256") – Specifies the hash algorithm to use. This can also be specified as part of the URL. Currently-supported algorithms are:

  • sha2-224
  • sha2-256
  • sha2-384
  • sha2-512
  • sha3-224
  • sha3-256
  • sha3-384
  • sha3-512

  Note: In FIPS 140-2 mode, the following algorithms are not certified and thus should not be used: sha3-224, sha3-256, sha3-384, and sha3-512.

• input (string: "") – Specifies the base64 encoded input data. One of input or batch_input must be supplied.

• reference (string: "") - A user-supplied string that will be present in the reference field on the corresponding batch_results item in the response, to assist in understanding which result corresponds to a particular input. Only valid on batch requests when using ‘batch_input’ below.

• batch_input (array<object>: nil) – Specifies a list of items for processing. When this parameter is set, if the parameter 'input' is also set, it will be ignored. Responses are returned in the 'batch_results' array component of the 'data' element of the response. Any batch output will preserve the order of the batch input. If the input data value of an item is invalid, the corresponding item in the 'batch_results' will have the key 'error' with a value describing the error. The format for batch_input is:

  {
    "batch_input": [
      {
        "input": "adba32=="
      },
      {
        "input": "aGVsbG8gd29ybGQuCg=="
      }
    ]
  }
  

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/hmac/my-key/sha2-512

Sample payload

{
  "input": "adba32=="
}

Sample response

{
  "data": {
    "hmac": "dGhlIHF1aWNrIGJyb3duIGZveAo="
  }
}

Sample payload with batch_input

{
  "batch_input": [
    {
      "input": "adba32=="
    },
    {
      "input": "adba32=="
    },
    {},
    {
      "input": ""
    }
  ]
}

Sample response for batch_input

{
  "data": {
    "batch_results": [
      {
        "hmac": "vault:v1:1jFhRYWHiddSKgEFyVRpX8ieX7UU+748NBwHKecXE3hnGBoAxrfgoD5U0yAvji7b5X6V1fP"
      },
      {
        "hmac": "vault:v1:1jFhRYWHiddSKgEFyVRpX8ieX7UU+748NBwHKecXE3hnGBoAxrfgoD5U0yAvji7b5X6V1fP"
      },
      {
        "error": "missing input for HMAC"
      },
      {
        "hmac": "vault:v1:/wsSP6iQ9ECO9RRkefKLXey9sDntzSjoiW0vBrWfUsYB0ISroyC6plUt/jN7gcOv9O+Ecow"
      }
    ]
  }
}

Sign data

This endpoint returns the cryptographic signature of the given data using the named key and the specified hash algorithm. The key must be of a type that supports signing.

Parameters

• name (string: <required>) – Specifies the name of the encryption key to use for signing. This is specified as part of the URL.

• key_version (int: 0) – Specifies the version of the key to use for signing. If not set, uses the latest version. Must be greater than or equal to the key's min_encryption_version, if set.

• hash_algorithm (string: "sha2-256") – Specifies the hash algorithm to use for supporting key types (notably, not including ed25519 which specifies its own hash algorithm). This can also be specified as part of the URL. Currently-supported algorithms are:

  • sha1
  • sha2-224
  • sha2-256
  • sha2-384
  • sha2-512
  • sha3-224
  • sha3-256
  • sha3-384
  • sha3-512
  • none

  Note: In FIPS 140-2 mode, the following algorithms are not certified and thus should not be used: sha3-224, sha3-256, sha3-384, and sha3-512.

  Warning: sha1 should be considered a compromised algorithm and used only for legacy applications. Signing using SHA-1 can be blocked by operators by assigning the following policy corresponding to a named key:

  path "/transit/sign/:name/sha1" {
    capabilities = ["deny"]
  }
  

  Note: using hash_algorithm=none requires setting prehashed=true and signature_algorithm=pkcs1v15. This generates a PKCSv1_5_NoOID signature rather than the PKCSv1_5_DERnull signature type usually created. See RFC 3447 Section 9.2.

• input (string: "") – Specifies the base64 encoded input data. One of input or batch_input must be supplied.

• reference (string: "") - A user-supplied string that will be present in the reference field on the corresponding batch_results item in the response, to assist in understanding which result corresponds to a particular input. Only valid on batch requests when using ‘batch_input’ below.

• batch_input (array<object>: nil) – Specifies a list of items for processing. When this parameter is set, any supplied 'input' or 'context' parameters will be ignored. Responses are returned in the 'batch_results' array component of the 'data' element of the response. Any batch output will preserve the order of the batch input. If the input data value of an item is invalid, the corresponding item in the 'batch_results' will have the key 'error' with a value describing the error. The format for batch_input is:

  {
    "batch_input": [
      {
        "input": "adba32==",
        "context": "abcd"
      },
      {
        "input": "aGVsbG8gd29ybGQuCg==",
        "context": "efgh"
      }
    ]
  }
  

• context (string: "") - Base64 encoded context for key derivation. Required if key derivation is enabled; currently only available with ed25519 keys.

• signature_context (string: "") EnterpriseEnterprise - Base64 encoded context for Ed25519ctx and Ed25519ph signatures.

• prehashed (bool: false) - Set to true when the input is already hashed. If the key type is rsa-2048, rsa-3072 or rsa-4096, then the algorithm used to hash the input should be indicated by the hash_algorithm parameter. Just as the value to sign should be the base64-encoded representation of the exact binary data you want signed, when set, input is expected to be base64-encoded binary hashed data, not hex-formatted. (As an example, on the command line, you could generate a suitable input via openssl dgst -sha256 -binary | base64.) On Enterprise EnterpriseEnterprise, enabling this will activate Ed25519ph signatures for Ed25519 keys along with hash_algorithm being either none or sha2-512.

• signature_algorithm (string: "pss") – When using a RSA key, specifies the RSA signature algorithm to use for signing. Supported signature types are:

  • pss
  • pkcs1v15

• marshaling_algorithm (string: "asn1") – Specifies the way in which the signature should be marshaled. This currently only applies to ECDSA keys. Supported types are:

  • asn1: The default, used by OpenSSL and X.509
  • jws: The version used by JWS (and thus for JWTs). Selecting this will also change the output encoding to URL-safe Base64 encoding instead of standard Base64-encoding.

• salt_length (string: "auto") – The salt length used to sign. This currently only applies to the RSA PSS signature scheme. Options are:

  • auto: The default used by Golang (causing the salt to be as large as possible when signing)
  • hash: Causes the salt length to equal the length of the hash used in the signature
  • An integer between the minimum and the maximum permissible salt lengths for the given RSA key size.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/sign/my-key/sha2-512

Sample payload

{
  "input": "adba32=="
}

Sample response

{
  "data": {
    "signature": "vault:v1:MEUCIQCyb869d7KWuA0hBM9b5NJrmWzMW3/pT+0XYCM9VmGR+QIgWWF6ufi4OS2xo1eS2V5IeJQfsi59qeMWtgX0LipxEHI="
  }
}

Sample payload with batch_input

Given an ed25519 key with derived keys set, the context parameter is expected for each batch_input item, and the response will include the derived public key for each item.

{
  "batch_input": [
    {
      "input": "adba32==",
      "context": "efgh"
    },
    {
      "input": "adba32==",
      "context": "abcd"
    },
    {}
  ]
}

Sample response for batch_input

{
  "data": {
    "batch_results": [
      {
        "signature": "vault:v1:+R3cxAy6j4KriYzAyExU6p1glnyT/eLDSaUZO7gr8a8kgi/zSynNbOBSDJcGaAfLD1OF2hGupYBYTjmZMNoVAA==",
        "publickey": "2fQIaaem7+EhSGs3jUebAS/8qP2+sUrmxOmgqZIZc0c="
      },
      {
        "signature": "vault:v1:3hBwA88lnuAVJqb5rCCEstzKYaBTeSdejk356BTCE/nKwySOhzQH3mWCvJZwbRptNGa7ia5ykosYYdJz+aIKDA==",
        "publickey": "goDXuePo7L9z6HOw+a54O4HeV189BLECK9nAUudwp4Y="
      },
      {
        "error": "missing input"
      }
    ]
  },
}

Verify signed data

This endpoint returns whether the provided signature is valid for the given data from either the sign data, generate HMAC or generate CMAC API calls.

Parameters

• name (string: <required>) – Specifies the name of the encryption key that was used to generate the signature or HMAC.

• hash_algorithm (string: "sha2-256") – Specifies the hash algorithm to use. This can also be specified as part of the URL. Currently-supported algorithms are:

  • sha1
  • sha2-224
  • sha2-256
  • sha2-384
  • sha2-512
  • sha3-224
  • sha3-256
  • sha3-384
  • sha3-512
  • none

  Note: In FIPS 140-2 mode, the following algorithms are not certified and thus should not be used: sha3-224, sha3-256, sha3-384, and sha3-512.

  Warning: sha1 should be considered a compromised algorithm. Signatures verified using the algorithm could be forgeries. Verification using SHA-1 can be blocked by operators by assigning the following policy corresponding to a named key:

  path "/transit/verify/:name/sha1" {
    capabilities = ["deny"]
  }
  

  Note: using hash_algorithm=none requires setting prehashed=true and signature_algorithm=pkcs1v15. This verifies a PKCSv1_5_NoOID signature rather than the PKCSv1_5_DERnull signature type usually verified. See RFC 3447 Section 9.2.

• input (string: "") – Specifies the base64 encoded input data. One of input or batch_input must be supplied.

• signature (string: "") – Specifies the signature output from the /transit/sign function. One of the following arguments must be supplied signature, hmac or cmac.

• hmac (string: "") – Specifies the signature output from the /transit/hmac function. One of the following arguments must be supplied signature, hmac or cmac.

• cmac (string: "") EnterpriseEnterprise – Specifies the signature output from the /transit/cmac function. One of the following arguments must be supplied signature, hmac or cmac.

• reference (string: "") - A user-supplied string that will be present in the reference field on the corresponding batch_results item in the response, to assist in understanding which result corresponds to a particular input. Only valid on batch requests when using ‘batch_input’ below.

• batch_input (array<object>: nil) – Specifies a list of items for processing. When this parameter is set, any supplied 'input', 'hmac' or 'signature' parameters will be ignored. 'batch_input' items should contain an 'input' parameter and either an 'hmac' or 'signature' parameter. All items in the batch must consistently supply either 'hmac' or 'signature' parameters. It is an error for some items to supply 'hmac' while others supply 'signature'. Responses are returned in the 'batch_results' array component of the 'data' element of the response. Any batch output will preserve the order of the batch input. If the input data value of an item is invalid, the corresponding item in the 'batch_results' will have the key 'error' with a value describing the error. The format for batch_input is:

  {
    "batch_input": [
      {
        "input": "adba32==",
        "hmac": "vault:v1:1jFhRYWHiddSKgEFyVRpX8ieX7UU+748NBwHKecXE3hnGBoAxrfgoD5U0yAvji7b5X6V1fP"
      },
      {
        "input": "aGVsbG8gd29ybGQuCg==",
        "hmac": "vault:v1:/wsSP6iQ9ECO9RRkefKLXey9sDntzSjoiW0vBrWfUsYB0ISroyC6plUt/jN7gcOv9O+Ecow"
      }
    ]
  }
  

• context (string: "") - Base64 encoded context for key derivation. Required if key derivation is enabled; currently only available with ed25519 keys.

• signature_context (string: "") EnterpriseEnterprise - Base64 encoded context for Ed25519ctx and Ed25519ph signatures.

• prehashed (bool: false) - Set to true when the input is already hashed. If the key type is rsa-2048, rsa-3072 or rsa-4096, then the algorithm used to hash the input should be indicated by the hash_algorithm parameter. Just as the value to sign should be the base64-encoded representation of the exact binary data you want signed, when set, input is expected to be base64-encoded binary hashed data, not hex-formatted. (As an example, on the command line, you could generate a suitable input via openssl dgst -sha256 -binary | base64.) On Enterprise EnterpriseEnterprise, enabling this will activate Ed25519ph signatures for Ed25519 keys along with hash_algorithm being either none or sha2-512.

• signature_algorithm (string: "pss") – When using a RSA key, specifies the RSA signature algorithm to use for signature verification. Supported signature types are:

  • pss
  • pkcs1v15

• marshaling_algorithm (string: "asn1") – Specifies the way in which the signature was originally marshaled. This currently only applies to ECDSA keys. Supported types are:

  • asn1: The default, used by OpenSSL and X.509
  • jws: The version used by JWS (and thus for JWTs). Selecting this will also expect the input encoding to URL-safe Base64 encoding instead of standard Base64-encoding.

• salt_length (string: "auto") – The salt length used to sign. This currently only applies to the RSA PSS signature scheme. Options are:

  • auto: The default used by Golang (causing the salt to be as large as possible when signing)
  • hash: Causes the salt length to equal the length of the hash used in the signature
  • An integer between the minimum and the maximum permissible salt lengths for the given RSA key size.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/verify/my-key/sha2-512

Sample payload

{
  "input": "abcd13==",
  "signature": "vault:v1:MEUCIQCyb869d7KWuA..."
}

Sample response

{
  "data": {
    "valid": true
  }
}

Sample payload with batch_input

{
  "batch_input": [
    {
      "input": "adba32==",
      "context": "abcd",
      "signature": "vault:v1:3hBwA88lnuAVJqb5rCCEstzKYaBTeSdejk356BTCE/nKwySOhzQH3mWCvJZwbRptNGa7ia5ykosYYdJz+aIKDA=="
    },
    {
      "input": "adba32==",
      "context": "efgh",
      "signature": "vault:v1:3hBwA88lnuAVJqb5rCCEstzKYaBTeSdejk356BTCE/nKwySOhzQH3mWCvJZwbRptNGa7ia5ykosYYdJz+aIKDA=="
    },
    {
      "input": "",
      "context": "abcd",
      "signature": "vault:v1:C/pxm5V1RI6kqudLdbLdj5Bpm2P38FKgvxoV69oNXphvJukRcQIqjZO793jCa2JPYPG21Y7vquDWy/Ff4Ma4AQ=="
    }
  ]
}

Sample response for batch_input

{
  "data": {
    "batch_results": [
      {
        "valid": true
      },
      {
        "valid": false
      },
      {
        "valid": true
      }
    ]
  },
}

Generate CMAC EnterpriseEnterprise

This endpoint returns the CMAC of given data using the specified key. The verify API can be called with the cmac argument to verify returned CMACs.

Parameters

• name (string: <required>) – Specifies the name of the key to use for the CMAC function. This is specified as part of the URL.

• key_version (int: 0) – Specifies the version of the key to use for the operation. If not set, uses the latest version. Must be greater than or equal to the key's min_encryption_version, if set.

• input (string: "") – Specifies the base64 encoded input data. One of input or batch_input must be supplied.

• mac_length (int: 0) - Specifies the MAC length to use (POST body parameter). The mac_length cannot be larger than the cipher's block size.

• url_mac_length (int: 0): Specifies the MAC length to use (URL parameter). If provided, this value overrides mac_length. The url_mac_length cannot be larger than the cipher's block size.

• batch_input (array<object>: nil) – Specifies a list of items for processing. When this parameter is set, if the parameter 'input' is also set, it will be ignored. Responses are returned in the 'batch_results' array component of the 'data' element of the response. Any batch output will preserve the order of the batch input. If the input data value of an item is invalid, the corresponding item in the 'batch_results' will have the key 'error' with a value describing the error. The format for batch_input is:

  {
    "batch_input": [
      {
        "input": "adba32=="
      },
      {
        "input": "aGVsbG8gd29ybGQuCg=="
      }
    ]
  }
  

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/cmac/my-key

Sample payload

{
  "input": "adba32=="
}

Sample response

{
  "data": {
    "cmac": "vault:v1:adba343QQ6XPDzm3V5XG9aOdQS0="
  }
}

Sample payload with batch_input

{
  "batch_input": [
    {
      "input": "adba32=="
    },
    {
      "input": "adba32==",
      "mac_length": 8
    }
  ]
}

Sample response for batch_input

{
  "data": {
    "batch_results": [
      {
        "reference": "",
        "cmac": "vault:v1:adba343QQ6XPDzm3V5XG9aOdQS0="
      },
      {
        "reference": "",
        "cmac": "vault:v1:adba343QQ6XPDzm3"
      }
    ]
  }
}

Backup key

This endpoint returns a plaintext backup of a named key. The backup contains all the configuration data and keys of all the versions along with the HMAC key. The response from this endpoint can be used with the /restore endpoint to restore the key.

Parameters

• name (string: <required>) - Name of the key.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    http://127.0.0.1:8200/v1/transit/backup/aes

Sample response

{
  "data": {
    "backup": "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"
  }
}

Restore key

This endpoint restores the backup as a named key. This will restore the key configurations and all the versions of the named key along with HMAC keys. The input to this endpoint should be the output of /backup endpoint.

Parameters

• backup (string: <required>) - Backed up key data to be restored. This should be the output from the /backup endpoint.

• name (string: <optional>) - If set, this will be the name of the restored key.

• force (bool: false) - If set, force the restore to proceed even if a key by this name already exists.

Sample payload

{
    "backup": "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"
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/restore

Trim key

This endpoint trims older key versions setting a minimum version for the keyring. Once trimmed, previous versions of the key cannot be recovered.

Parameters

• min_available_version (int: <required>) - The minimum available version for the key ring. All versions before this version will be permanently deleted. This value can at most be equal to the lesser of min_decryption_version and min_encryption_version. This is not allowed to be set when either min_encryption_version or min_decryption_version is set to zero.

Sample payload

{
  "min_available_version": 2
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/keys/my-key/trim

Configure cache

This endpoint is used to configure the transit engine's cache. Note that configuration changes will not be applied until the transit plugin is reloaded which can be achieved using the [/sys/plugins/reload/backend][sys-plugin-reload-backend] endpoint.

Parameters

• size (int: 0) - Specifies the size in terms of number of entries. A size of 0 means unlimited. A Least Recently Used (LRU) caching strategy is used for a non-zero cache size. Must be 0 (default) or a value greater or equal to 10 (minimum cache size).

Sample payload

{
  "size": 456
}

Sample request

$ curl \
    --header "X-Vault-Token: ..."
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/transit/cache-config

Read transit cache configuration

This endpoint retrieves configurations for the transit engine's cache.

Sample request

$ curl \
    --header "X-Vault-Token: ..."
    --request GET \
    http://127.0.0.1:8200/v1/transit/cache-config

Sample response

  "data": {
    "size": 0
  },

Managed keys EnterpriseEnterprise

Managed Keys can be used with the Transit Secrets Engine to perform cryptographic operations. Currently, Sign Data and Verify Signed Data are well-supported across all the managed key types.

Only PKCS#11 managed keys support Encrypt Data and Decrypt Data operations at this time. We are planning on adding support for AWS, GCP and Azure managed keys at a later time.

When a Transit key is created of type managed_key, Transit will look up the key by name or ID, and will attempt to generate the key when key generation is allowed (as specified when the Create/Update Managed Key endpoint is called). Key generation is currently supported for cloud KMSes and for certain PKCS#11 mechanisms on HSMs. This is a best effort operation, so certain KMS/HSM/key configurations will require the key to exist externally prior to use with Transit.

For key types and mechanisms that require an IV, this value can be provided via the nonce parameter of the Encrypt Data and Decrypt Data endpoints.

Signing and verifying data with a Managed Key through Transit may require pre-hashing of the data. Transit can be informed that data is pre-hashed with the prehashed parameter of the Sign Data and Verify Signed Data endpoints.