HashiTalks 2025 Learn about unique use cases, homelab setups, and best practices at scale at our 24-hour virtual knowledge sharing event. Register
Vault
Vault Home

Automated license utilization reporting

Enterprise

Appropriate Vault Enterprise  license required

Automated license utilization reporting sends license utilization data to HashiCorp without requiring you to manually collect and report them. It also lets you review your license usage with the monitoring solution you already use (for example Splunk, Datadog, or others) so you can optimize and manage your deployments. Use these reports to understand how much more you can deploy under your current contract, protect against overutilization, and budget for predicted consumption.

Automated reporting shares the minimum data required to validate license utilization as defined in our contracts. They consist of mostly computed metrics and will never contain Personal Identifiable Information (PII) or other sensitive information. Automated reporting shares the data with HashiCorp using a secure, unidirectional HTTPS API and makes an auditable record in the product logs each time it submits a report. The reporting process is GDPR compliant and submits reports roughly once every 24 hours.

Enable automated reporting

To enable automated reporting, you need to make sure that outbound network traffic is configured correctly and upgrade your enterprise product to a version that supports it. If your installation is air-gapped or network settings are not in place, automated reporting will not work.

1. Allow outbound HTTPS traffic on port 443

Make sure that your network allows HTTPS egress on port 443 to https://reporting.hashicorp.services by allow-listing the following IP addresses:

  • 100.20.70.12
  • 35.166.5.222
  • 23.95.85.111
  • 44.215.244.1

2. Upgrade

Upgrade to a release that supports license utilization reporting. These releases include:

3. Check logs

Automatic license utilization reporting will start sending data within roughly 24 hours. Check the server logs for records that the data sent successfully.

You will find log entries similar to the following:

[DEBUG] core.reporting: beginning snapshot export
[DEBUG] core.reporting: creating payload
[DEBUG] core.reporting: marshalling payload to json
[DEBUG] core.reporting: generating authentication headers
[DEBUG] core.reporting: creating request
[DEBUG] core.reporting: sending request
[DEBUG] core.reporting: performing request: method=POST url=https://reporting.hashicorp.services
[DEBUG] core.reporting: recording audit record
[INFO]  core.reporting: Report sent: auditRecord="{\"payload\":{\"payload_version\":\"1\",\"license_id\":\"97afe7b4-b9c8-bf19-bf35-b89b5cc0efea\",\"product\":\"vault\",\"product_version\":\"1.14.0-rc1+ent\",\"export_timestamp\":\"2023-06-01T09:34:44.215133-04:00\",\"snapshots\":[{\"snapshot_version\":1,\"snapshot_id\":\"0001J7H7KMEDRXKM5C1QJGBXV3\",\"process_id\":\"01H1T45CZK2GN9WR22863W2K32\",\"timestamp\":\"2023-06-01T09:34:44.215001-04:00\",\"schema_version\":\"1.0.0\",\"service\":\"vault\",\"metrics\":{\"clientcount.current_month_estimate\":{\"key\":\"clientcount.current_month_estimate\",\"kind\":\"sum\",\"mode\":\"write\",\"labels\":{\"type\":{\"entity\":20,\"nonentity\":11}}},\"clientcount.previous_month_complete\":{\"key\":\"clientcount.previous_month_complete\",\"kind\":\"sum\",\"mode\":\"write\",\"labels\":{\"type\":{\"entity\":10,\"nonentity\":11}}}}}],\"metadata\":{\"vault\":{\"billing_start\":\"2023-03-01T00:00:00Z\",\"cluster_id\":\"a8d95acc-ec0a-6087-d7f6-4f054ab2e7fd\"}}}}"
[DEBUG] core.reporting: completed recording audit record
[DEBUG] core.reporting: export finished successfully

If your installation is air-gapped or your network doesn’t allow the correct egress, logs will show an error.

[DEBUG] core.reporting: beginning snapshot export
[DEBUG] core.reporting: creating payload
[DEBUG] core.reporting: marshalling payload to json
[DEBUG] core.reporting: generating authentication headers
[DEBUG] core.reporting: creating request
[DEBUG] core.reporting: sending request
[DEBUG] core.reporting: performing request: method=POST url=https://reporting.hashicorp.services
[DEBUG] core.reporting: error status code received: statusCode=403

In this case, reconfigure your network to allow egress and check back in 24 hours.

Opt out

If your installation is air-gapped or you want to manually collect and report on the same license utilization metrics, you can opt-out of automated reporting.

Manually reporting these metrics can be time consuming. Opting out of automated reporting does not mean that you also opt out from sending license utilization metrics. Customers who opt out of automated reporting will still be required to manually collect and send license utilization metrics to HashiCorp.

If you are considering opting out because you’re worried about the data, we strongly recommend that you review the example payloads before opting out. If you have concerns with any of the automatically-reported data please bring them to your account manager.

You have two options to opt out of automated reporting:

  • HCL configuration (recommended)
  • Environment variable (requires restart)

HCL configuration

Opting out in your product’s configuration file doesn’t require a system restart, and is the method we recommend. Add the following block to your server configuration file (e.g. vault-config.hcl).

reporting {
    license {
        enabled = false
   }
}

Warning

When you have a cluster, each node must have the reporting stanza in its configuration to be consistent. In the event of leadership change, nodes will use its server configuration to determine whether or not to opt-out the automated reporting. Inconsistent configuration between nodes will change the reporting status upon active unseal.

You will find the following entries in the server log.

[DEBUG] core: reloading automated reporting
[INFO]  core: opting out of automated reporting
[DEBUG] activity: there is no reporting agent configured, skipping counts reporting

Environment variable

If you need to, you can also opt out using an environment variable, which will provide a startup message confirming that you have disabled automated reporting. This option requires a system restart.

Note

If the reporting stanza exists in the configuration file, the OPTOUT_LICENSE_REPORTING value overrides the configuration.

Set the following environment variable.

$ export OPTOUT_LICENSE_REPORTING=true

Now, restart your Vault servers from the shell where you set the environment variable.

You will find the following entries in the server log.

[INFO]  core: automated reporting disabled via environment variable: env=OPTOUT_LICENSE_REPORTING
[INFO]  core: opting out of automated reporting
[DEBUG] activity: there is no reporting agent configured, skipping counts reporting

Check your product logs roughly 24 hours after opting out to make sure that the system isn’t trying to send reports.

If your configuration file and environment variable differ, the environment variable setting will take precedence.

Example payloads

HashiCorp collects the following utilization data as JSON payloads:

  • payload_version - The version of this payload schema

  • license_id - The license ID for this product

  • product - The product that this contribution is for

  • product_version - The product version this contribution is for

  • export_timestamp- The date and time for this contribution

  • snapshots - An array of snapshot details. A snapshot is a structure that represents a single data collection

    • snapshot_version - The version of the snapshot package that produced this snapshot
    • snapshot_id - A unique identifier for this particular snapshot
    • process_id - An identifier for the system that produced this snapshot
    • timestamp - The date and time for this snapshot
    • schema_version - The version of the schema associated with this snapshot
    • service - The service that produced this snapshot (likely to be product name)
    • metrics - A map of representations of snapshot metrics contained within this snapshot
      • key - The key name associated with this metric
      • kind - The kind of metric (feature, counter, sum, or mean)
      • mode - The mode of operation associated with this metric (write or collect)
      • labels - The labels associated with each collected metric
        • entity - The sum of tokens generated for a unique client identifier
        • nonentity - The sum of tokens without an entity attached

  • metadata - Optional product-specific metadata

    • billing_start - The billing start date associated with the reporting cluster (license start date if not configured).

      Important change to supported versions

      As of 1.16.7, 1.17.3 and later, the billing start date automatically rolls over to the latest billing year at the end of the last cycle. For more information, refer to the upgrade guide for your Vault version:

      Vault v1.16.x, Vault v1.17.x

    • cluster_id - The cluster UUID as shown by vault status on the reporting cluster

{
  "payload_version": "1",
  "license_id": "97afe7b4-b9c8-bf19-bf35-b89b5cc0efea",
  "product": "vault",
  "product_version": "1.14.0-rc1+ent",
  "export_timestamp": "2023-06-01T11:39:00.76643-04:00",
  "snapshots": [
    {
      "snapshot_version": 1,
      "snapshot_id": "0001J7HEWM1PEHPMF5YZT8EV65",
      "process_id": "01H1VSQMNYAP77R566F1Y03GE6",
      "timestamp": "2023-06-01T11:39:00.766099-04:00",
      "schema_version": "1.0.0",
      "service": "vault",
      "metrics": {
        "clientcount.current_month_estimate": {
          "key": "clientcount.current_month_estimate",
          "kind": "sum",
          "mode": "write",
          "labels": {
            "type": {
              "entity": 20,
              "nonentity": 11
            }
          }
        },
        "clientcount.previous_month_complete": {
          "key": "clientcount.previous_month_complete",
          "kind": "sum",
          "mode": "write",
          "labels": {
            "type": {
              "entity": 10,
              "nonentity": 11
            }
          }
        }
      }
    }
  ],
  "metadata": {
    "vault": {
      "billing_start": "2023-03-01T00:00:00Z",
      "cluster_id": "a8d95acc-ec0a-6087-d7f6-4f054ab2e7fd"
    }
  }
}

Pre-1.9 counts

When upgrading Vault from 1.8 (or earlier) to 1.9 (or later), utilization reporting will only include the non-entity tokens that are used after the upgrade.

Starting in Vault 1.9, the activity log records and de-duplicates non-entity tokens by using the namespace and token's policies to generate a unique identifier. Because Vault did not create identifiers for these tokens before 1.9, the activity log cannot know whether this token has been seen pre-1.9. To prevent inaccurate and inflated counts, the activity log will ignore any counts of non-entity tokens that were created before the upgrade and only the non-entity tokens from versions 1.9 and later will be counted.

See the client count overview and FAQ for more information.

Edit this page on GitHub